| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Improves upon commit 32db2b125190d366be472ccb7cad833248696144
The getline() implementation often uses a more greedy way of allocating memory.
Using this buffer directly and forcing an allocation (by setting it to NULL)
would waste a bit of extra space, depending on the implementation of course.
Tested on musl libc and glibc.
The current glibc version allocates a minimum of 120 bytes per line.
For smaller lines musl libc seems less wasteful but still wastes a few bytes
per line.
On a dmenu_path listing on my system the memory usage was about 350kb (old) vs
30kb (new) on Void Linux glibc.
Side-note that getline() also reads NUL bytes in lines, while strdup() would
read until the NUL byte. Since dmenu reads text lines either is probably
fine(tm). Also rename junk to linesiz.
|
| |
|
|
|
| |
Keep track of the amount of items (not a total buffer size), allocate an array of
new items. For now change BUFSIZ bytes to 256 * sizeof(struct item)).
|
| |
|
|
| |
Maybe too obvious / redundant, but OK.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
according to the getline(3) documentation, the calling code needs to
free the buffer even if getline fails.
dmenu currently doesn't do that which results in a small leak in case of
failure (e.g when piped /dev/null)
$ ./dmenu < /dev/null
==8201==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 120 byte(s) in 1 object(s) allocated from:
#0 0x7f6bf5785ef7 in malloc
#1 0x7f6bf538ec84 in __getdelim
#2 0x405d0c in readstdin dmenu.c:557
moving `line = NULL` inside the loop body wasn't strictly necessary, but
IMO it makes it more apparent that `line` is getting cleared to NULL
after each successful iteration.
|
| |
|
|
|
|
| |
* Increase the length of composed strings to the same limit as st (32 to 64 bytes).
* Initialize ksym to NoSymbol to be safe: currently this is not an issue though.
* Add comments to clarify the return values of XmbLookupString a bit.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
in libXft 2.3.5
https://gitlab.freedesktop.org/xorg/lib/libxft/-/blob/libXft-2.3.5/NEWS
|
| |
|
|
| |
Reported by Santtu Lakkala <inz@inz.fi>, thanks!
|
| |
|
|
|
|
|
|
|
| |
we already need to know the string length since `cursor` needs to be
adjusted.
so just calculate the length beforehand and use `memcpy` to copy exactly
as much as needed (as opposed to `strncpy` which always writes `n`
bytes).
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
currently readstdin():
- fgets() into a local buffer,
- strchr() the buffer to eleminate the newline
- stdups() the buffer into items
a simpler way is to just use getline(3), which will do the allocation
for us; eliminating the need for stdup()-ing.
additionally getline returns back the amount of bytes read, which
eliminates the need for strchr()-ing to find the newline.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
| |
Always use ~30% of the monitor width for the input in horizontal mode.
Patch adapted from NRK patches.
This also does not calculate inputw when using vertical mode anymore (because
the code is removed).
|
| |
|
|
|
| |
additionally, ellipsis_width (which shouldn't change) is made static to
avoid re-calculating it on each drw_text() call.
|
| |
|
|
|
|
|
|
|
| |
this patch just rejects *any* 0 width draws, which is surely an error by
the caller.
this also guards against cases where the width is too small for the
ellipsis to fit, so ellipsis_w will remain 0.
reported by Bakkeby <bakkeby@gmail.com>
|
| |
|
|
| |
From commit 6818e07291f3b2913e687c8ec3d3fe4711724050 by NRK, thanks
|
| |
|
|
|
|
| |
This reverts commit 6818e07291f3b2913e687c8ec3d3fe4711724050.
This broke keys such as ^W to delete-backward-word
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
while i was timing the performance issue, i noticed that there was lots
of random redrawing going on.
turns out there were coming from here; if someone presses CTRL/ALT etc
without pressing anything else, nothing will be inserted, so nothing
will change. but the code will `break`, go down and do a needless redraw.
this patch changes it to simply return if the keypress iscntrl()
also avoid potential UB by casting *buf into an unsigned char.
|
| |
|
|
|
| |
`items` itself is not checked for NULL as calling free on NULL is defined to be
a no-op.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this was the last piece of the puzzle, the case where we can't find any
font to draw the codepoint.
in such cases, we use XftFontMatch() which is INSANELY slow. but that's
not the real problem. the real problem was we were continuously trying
to match the same thing over and over again.
this patch introduces a small cache, which keeps track a couple
codepoints for which we know we won't find any matches.
with this, i can dump lots of emojies into dmenu where some of them
don't have any matching font, and still not have dmenu lag insanely or
FREEZE completely when scrolling up and down.
this also improves startup time, which will of course depend on the
system and all installed fonts; but on my system and test case i see the
following startup time drop:
before -> after
60ms -> 34ms
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
a massive amount of time inside readstdin() is spent trying to get the
max input width and then put it into inputw, only for it to get clamped
down to mw/3 inside setup().
it makes more sense to calculate inputw inside setup() once we have mw
available. similar to the last patch, i see noticeable startup
performance improvement:
before -> after
160ms -> 60ms
additionally this will take fallback fonts into account compared to the
previous version, so it's not only more performant but also more correct.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this replaces inefficient pattern of `MIN(TEXTW(..), n)` with
drw_fontset_getwidth_clamp() instead, which is far more efficient when
we only want up to a certain width.
dumping a decently sized (unicode) emoji file into dmenu, I see the
startup time drop significantly with this patch.
before -> after
360ms -> 160ms
this should also noticeably improve input latency (responsiveness) given
that calcoffsets() and drawmenu() are pretty hot functions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
getting the width of a string is an O(n) operation, and in many cases
users only care about getting the width upto a certain number.
instead of calling drw_fontset_getwidth() and *then* clamping the
result, this patch introduces drw_fontset_getwidth_clamp() function,
similar to strnlen(), which will stop once we reach n.
the `invert` parameter was overloaded internally to preserve the API,
however library users should be calling drw_fontset_getwidth_clamp() and
not depend upon internal behavior of drw_text().
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this patch makes some non-trivial changes, which significantly improves
the performance of drawing large strings as well as fixes any issues
regarding the printing of the ellipsis when string gets truncated.
* performance:
before there were two O(n) loops, one which finds how long we can go
without changing font, and the second loop would (incorrectly) truncate
the string if it's too big.
this patch merges the overflow calculation into the first loop and exits
out when overflow is detected. when dumping lots of emojies into dmenu,
i see some noticeable startup time improvement:
before -> after
460ms -> 360ms
input latency when scrolling up/down is also noticeably better and can
be tested with the following:
for _ in $(seq 20); do
cat /dev/urandom | base64 | tr -d '\n' | head -c 1000000
echo
done | ./dmenu -l 10
* correctness:
the previous version would incorrectly assumed single byte chars and
would overwrite them with '.' , this caused a whole bunch of obvious
problems, including the ellipsis not getting rendered if then font
changed.
in addition to exiting out when we detect overflow, this patch also
keeps track of the last x-position where the ellipsis would fit. if we
detect overflow, we simply make a recursing call to drw_text() at the
ellipsis_x position and overwrite what was there.
so now the ellipsis will always be printed properly, regardless of
weather the font changes or if the string is single byte char or not.
the idea of rendering the ellipsis on top incase of overflow was
from Bakkeby <bakkeby@gmail.com>, thanks! however the original patch had
some issues incorrectly truncating the prompt (-p flag) and cutting off
emojies. those have been fixed in here.
|
| |
|
|
|
|
| |
Reported by Prathu Baronia <prathu.baronia@praton.me>, patch slightly changed.
Thanks!
|
| | |
|
| | |
|
| |
|
|
|
|
| |
... compared to the old cistrstr().
Thanks for the feedback!
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
This reverts commit c585e8e498ec6f9c423ab8ea07cf853ee5b05fbe.
It causes issues with truncation of characters when the text does not fit and
so on. The patch should be reworked and properly tested.
|
| |
|
|
|
|
| |
The keypad Enter key was already supported. On some keyboard layouts like my
laptop the page-up and page-down key is more comfortable to use.
This adds a few lines but no complexity.
|
| |
|
|
|
|
| |
Calculates len & ew in drw_font_getexts loop by incrementing instead of
decrementing; as such avoids proportional increase in time spent in loop
based on provided strings size.
|
| | |
|
| |
|
|
| |
... and bump LICENSE year.
|
| |
|
|
|
| |
Synced from dwm.
Patch by Alex Flierl <shad0w73@freenet.de>, thanks.
|
| |
|
|
|
|
|
| |
dmenu will not handle IME support (st will, atleast for now).
revert parts of commit 377bd37e212b1ec4c03a481245603c6560d0be22
this commit also broke input focus.
|
| |
|
|
| |
die() already prints a newline.
|
| |
|
|
| |
(as dmenu_run is)
|
| |
|
|
| |
for example when IME variables are set, but the program is not started (yet).
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
| |
If stdin is a tty and dmenu is ran with the fast option then it's
impossible to close stdin because the keyboard is already grabbed.
|
| | |
|
| |
|
|
| |
Don't be fancy and just show the actual output so debugging is simpler.
|
| |
|
|
|
| |
Building with debug symbols is worthless unless LDFLAGS are manually adjusted
as well.
|
| |
|
|
| |
this is the proper idiom
|
